| Items |
 /Asset/a1063.jpg A-9597 Power Line HEMP Filters Legacy |
/Asset/a1063.jpg A-9598 Power Line HEMP Filters Legacy |
/Asset/a1063.jpg A-9599 Power Line HEMP Filters Legacy |
/Asset/a1063.jpg A-9600 Power Line HEMP Filters Legacy |
/Asset/a1063.jpg A-8292 Power Line HEMP Filters Legacy |
|||||
| Voltage | 0 to 480 V | |||||||||
| Operating Temperature | -40 to +71 ºC | |||||||||
| Storage Temperature | -55 to +105 ºC | |||||||||
| Maximum Altitude | 15000 ft | |||||||||
| Humidity | 10 to 90 % | |||||||||
| Fungus | Non-nutritive materials are used | |||||||||
| Corrosion | Hermetically sealed steel or aluminum enclosures with tin-lead plating | |||||||||
| Maximum Dimension A | 8.90 in | 7.40 in | 7.90 in | 8.40 in | ||||||
| Dimension B | 6.50 in | 5.00 in | 5.50 in | 6.00 in | ||||||
| Note |
With HEMP protection devices removed. Full load from 100 KHz to 20 MHz. |
With HEMP protection devices removed. Full load from 100 KHz to 20 MHz. |
With HEMP protection devices removed. 600 Ω line to line and 300 Ω line to ground. Full load from 100 KHz to 20 MHz. |
With HEMP protection devices removed. 100 Ω line to line and 50 Ω line to ground. Full load from 100 KHz to 20 MHz. |
Full load from 100 KHz to 20 MHz. When tested with external V130LA20B MOV connected from each line to ground. |
|||||
| Voltage (Vrms) | 35 | 132 | 132 | 35 | 125 | |||||
| Voltage (Peak) | 50 | 187 | 187 | 50 | 177 | |||||
| Current | 2 A | 2 A | 1/2 A | 1/2 A | 5 A | |||||
| Frequency | DC-60 Hertz | DC-60 Hertz | DC-60 Hertz | DC-60 Hertz | DC to 60 Hertz | |||||
| DCR | ≤ 0.3 Ω | ≤ 1.0 Ω | ≤ 6.1 Ω | ≤ 1.5 Ω | ≤ 0.5 Ω | |||||
| DWV (DC) | 200 V | 600 V | 600 V | 200 V | 600 V | |||||
| Passband Response (Limit) | 0 to 3000 Hertz, 1 dB 0 to 3500 Hertz, 3 dB | 0 to 3000 Hertz, 1 dB 0 to 3500 Hertz, 3 dB | ||||||||
| MIL-STD-220 Insertion Loss (Limit) | 100 dB Minimum from 14 kHz through 10 GHz | |||||||||
| Type | Short Pulse | |||||||||
| Type of Injection | Common Mode Wire-to-ground | |||||||||
| Common Mode Peak Short- Circuit Current | 5000 A | 5000 A | 5000 A | 5000 A | 2500 A | |||||
| Wire-to-ground Peak Short- Circuit Current | 2500 A | 3536 A | 3536 A | 2500 A | 2500 A | |||||
| Common Mode Source Impedance | ≥ 60 Ω | |||||||||
| Wire-to-ground Source Impedance | ≥ 60 Ω | |||||||||
| Wire-to-ground Load Impedance | 2 Ω | 2 Ω | 50 Ω | 50 Ω | 2 Ω | |||||
| Common Mode Residual Peak Current | ≤ 0.1 A | ≤ 1.0 A | ≤ 1.0 A | ≤ 0.1 A | ≤ 1.0 A | |||||
| Wire-to-ground Residual Peak Current | ≤ 0.1 A | ≤ 1.0 A | ≤ 1.0 A | ≤ 0.1 A | ≤ 1.0 A | |||||
| Attributes/Options |
|
|||||||||
|
|
||||||||||
