CAD (0)
▾
- Voltage : 0 to 480 Volts
- Current : 0 to 100 Amps
- Frequency : DC to 400 Hz
- Insertion Loss : 100 dB minimum from 14 kHz to 10 GHz
- Operating Temperature : -40 ºC to +71 ºC
- Storage Temperature : -55 ºC to +105 ºC
- Altitude : Maximum of 15,000 feet
- Humidity : 10 to 90 Percent
- Fungus : Non-nutritive materials are used
- Corrosion : Hermetically sealed steel or aluminum enclosures with tin-lead plating
Unit of Measure
Specifications
Voltage |
N/A 0 to 480 V |
Operating Temperature |
N/A -40 to +71 ºC |
Storage Temperature |
N/A -55 to +105 ºC |
Maximum Altitude |
N/A 15000 ft |
Humidity |
N/A 10 to 90 % |
Fungus |
N/A Non-nutritive materials are used |
Corrosion |
N/A Hermetically sealed steel or aluminum enclosures with tin-lead plating |
Note |
N/A
Full load from 100 KHz to 20 MHz. When tested with external V130LA20B MOV connected from each line to ground. |
Electrical Ratings
Voltage (Vrms) |
N/A 125 |
Voltage (Peak) |
N/A 177 |
Current |
N/A 5 A |
Frequency |
N/A DC to 60 Hertz |
DCR |
N/A ≤ 0.5 Ω |
DWV (DC) |
N/A 600 V |
MIL-STD-220 Insertion Loss (Limit) |
N/A 100 dB Minimum from 14 kHz through 10 GHz |
PCI - HEMP Parameters
Type |
N/A Short Pulse |
Type of Injection |
N/A Common Mode Wire-to-ground |
Common Mode Peak Short- Circuit Current |
N/A 2500 A |
Wire-to-ground Peak Short- Circuit Current |
N/A 2500 A |
Common Mode Source Impedance |
N/A ≥ 60 Ω |
Wire-to-ground Source Impedance |
N/A ≥ 60 Ω |
Wire-to-ground Load Impedance |
N/A 2 Ω |
Common Mode Residual Peak Current |
N/A ≤ 1.0 A |
Wire-to-ground Residual Peak Current |
N/A ≤ 1.0 A |
Attributes/Options
Attributes/Options |
N/A
|
