Control/Signal Line HEMP Filters Standard Performance On Captor Corporation

Voltage Rating : 48 VDC or 120 VAC @ 0-60 Hz
Visual/Mechanical : Per MIL-PRF-15733, paragraph 4.6.1
Capacitance : Per MIL-STD-202, Method 305 @ 1 kHz
Insulation Resistance : Per MIL-PRF-15733, paragraph 4.6.7 with Hemp Protection Module removed.
Dielectric Withstanding Voltage : Per MIL-PRF-15733, paragraph 4.6.5 with Hemp Protection Module removed.
Standard Insertion Loss : Per MIL-STD-220, 20 dB @ 10 kHz, 80 dB @ 10 MHz to 10 GHz
Terminal Strength : Per MIL-PRF-15733, paragraph 4.6.11
Voltage Discharge : Discharge to less than 30 Volts within 2 seconds after removal of power
Terminals : 1/4" Quick Connect Tab
Operating Temperature : -55 ºC to +71 ºC
Storage Temperature : -55 ºC to +105 ºC
Chassis & Terminal Finish : Electro Tin-Lead
Chassis Material : 20 GA. Cold Rolled Steel

Item #	Item Name	Major Dimension A	Major Dimension B	Major Dimension C	Major Dimension D	CAD
A-10356	N/A 1/2 Ampere (A) Current Control/Signal Line HEMP Filter Standard Performance	N/A 6.90 in	N/A 4.50 in	N/A 1.25 in	N/A 2.50 in	N/A
A-10357	N/A 2 Ampere (A) Current Control/Signal Line HEMP Filter Standard Performance	N/A 6.90 in	N/A 4.50 in	N/A 1.50 in	N/A 2.50 in	N/A
A-10358	N/A 5 Ampere (A) Current Control/Signal Line HEMP Filter Standard Performance	N/A 8.40 in	N/A 6.00 in	N/A 2.00 in	N/A 3.00 in	N/A
A-10360	N/A 1/2 Ampere (A) Current Control/Signal Line HEMP Filter Standard Performance	N/A 6.40 in	N/A 4.00 in	N/A 1.25 in	N/A 2.50 in	N/A
A-10361	N/A 2 Ampere (A) Current Control/Signal Line HEMP Filter Standard Performance	N/A 6.40 in	N/A 4.00 in	N/A 1.25 in	N/A 2.50 in	N/A
A-10362	N/A 5 Ampere (A) Current Control/Signal Line HEMP Filter Standard Performance	N/A 10.40 in	N/A 8.00 in	N/A 1.50 in	N/A 2.50 in	N/A