Captor Corporation - Control/Signal Line HEMP Filters Standard Performance

Unit of Measure

Items	A-10356 1/2 Ampere (A) Current Control/Signal Line HEMP Filter Standard Performance	A-10357 2 Ampere (A) Current Control/Signal Line HEMP Filter Standard Performance	A-10358 5 Ampere (A) Current Control/Signal Line HEMP Filter Standard Performance	A-10360 1/2 Ampere (A) Current Control/Signal Line HEMP Filter Standard Performance	A-10361 2 Ampere (A) Current Control/Signal Line HEMP Filter Standard Performance
Description	N/A Voltage Rating : 48 VDC or 120 VAC @ 0-60 Hz Visual/Mechanical : Per MIL-PRF-15733, paragraph 4.6.1 Capacitance : Per MIL-STD-202, Method 305 @ 1 kHz Insulation Resistance : Per MIL-PRF-15733, paragraph 4.6.7 with Hemp Protection Module removed. Dielectric Withstanding Voltage : Per MIL-PRF-15733, paragraph 4.6.5 with Hemp Protection Module removed. Standard Insertion Loss : Per MIL-STD-220, 20 dB @ 10 kHz, 80 dB @ 10 MHz to 10 GHz Terminal Strength : Per MIL-PRF-15733, paragraph 4.6.11 Voltage Discharge : Discharge to less than 30 Volts within 2 seconds after removal of power Terminals : 1/4" Quick Connect Tab Operating Temperature : -55 ºC to +71 ºC Storage Temperature : -55 ºC to +105 ºC Chassis & Terminal Finish : Electro Tin-Lead Chassis Material : 20 GA. Cold Rolled Steel
Brands	N/A Captor
Voltage Rating (DC)	N/A 48 V @ 0 to 60 Hz	N/A 48 V @ 0 to 60 Hz	N/A 48 V @ 0 to 60 Hz	N/A	N/A
Voltage Rating (AC)	N/A	N/A	N/A	N/A 120 V @ 0 to 60 Hz	N/A 120 V @ 0 to 60 Hz
Frequency	N/A 0 to 60 Hz
Current	N/A 1/2 A	N/A 2 A	N/A 5 A	N/A 1/2 A	N/A 2 A
Insertion Loss Curve	N/A Curve 1, Minimum Insertion Loss
High-Altitude Electromagnetic Pulse (HEMP) Residual	N/A < 0.1 A	N/A < 0.1 A	N/A < 0.1 A	N/A < 1 A	N/A < 1 A
Major Dimension A	N/A 6.90 in	N/A 6.90 in	N/A 8.40 in	N/A 6.40 in	N/A 6.40 in
Major Dimension B	N/A 4.50 in	N/A 4.50 in	N/A 6.00 in	N/A 4.00 in	N/A 4.00 in
Major Dimension C	N/A 1.25 in	N/A 1.50 in	N/A 2.00 in	N/A 1.25 in	N/A 1.25 in
Major Dimension D	N/A 2.50 in	N/A 2.50 in	N/A 3.00 in	N/A 2.50 in	N/A 2.50 in
Visual/Mechanical	N/A Per MIL-PRF-15733, Paragraph 4.6.1
Capacitance	N/A Per MIL-STD-202, Method 305 @ 1 kHz
Insulation Resistance	N/A Per MIL-PRF-15733, Paragraph 4.6.7 with HEMP Protection Module Removed
Dielectric Withstanding Voltage	N/A Per MIL-PRF-15733, Paragraph 4.6.5 with HEMP Protection Module Removed
Standard Insertion Loss	N/A Per MIL-STD-220, 20 dB @ 10 kHz, 80 dB @ 10 MHz to 10 GHz
Terminal Strength	N/A Per MIL-PRF-15733, Paragraph 4.6.11
Voltage Discharge	N/A Discharge to less than 30 Volts within 2 seconds after removal of power
Quick Connect Tab Terminals	N/A 1/4 in
Operating Temperature	N/A -55 to +71 ºC
Storage Temperature	N/A -55 to +105 ºC
Chassis & Terminal Finish	N/A Electro Tin-Lead
Chassis Material	N/A Cold Rolled Steel (CRS)
Chassis Material Thickness	N/A 20 gauge
Minimum Insertion Loss	N/A 20 dB @ 10 kHz 40 dB @ 100 kHz 60 dB @ 1 MHz 80 dB @ 10 MHz to 10 GHz
Compliance	N/A MIL-STD-188-125-1 MIL-STD-188-125-2
Features	N/A Inductive Input. Individually Filtered Lines. Standard Performance and High Performance Insertion Loss Versions. Captor can Supply Enclosures Holding Multiple Filters. Field Replaceable HEMP Protection Module. Custom Options Available.
Note	N/A For compliance to E2 (intermediate pulse) add an "A" to the end of the part number (A-10356A).	N/A For compliance to E2 (intermediate pulse) add an "A" to the end of the part number (A-10356A).	N/A For compliance to E2 (intermediate pulse) add an "A" to the end of the part number (A-10356A).	N/A For compliance to E2 (intermediate pulse) add an "A" to the end of the part number (A-10356A) For 120 VAC units only, compliance to E2 increases overall dimension "A" by 2.5 inches.	N/A For compliance to E2 (intermediate pulse) add an "A" to the end of the part number (A-10356A) For 120 VAC units only, compliance to E2 increases overall dimension "A" by 2.5 inches.