| Items |
 /Asset/a1108.jpg A-10356 1/2 Ampere (A) Current Control/Signal Line HEMP Filter Standard Performance |
/Asset/a1108.jpg A-10357 2 Ampere (A) Current Control/Signal Line HEMP Filter Standard Performance |
/Asset/a1108.jpg A-10358 5 Ampere (A) Current Control/Signal Line HEMP Filter Standard Performance |
/Asset/a1108.jpg A-10360 1/2 Ampere (A) Current Control/Signal Line HEMP Filter Standard Performance |
/Asset/a1108.jpg A-10361 2 Ampere (A) Current Control/Signal Line HEMP Filter Standard Performance |
|||||
| Description |
|
|||||||||
| Brands | Captor | |||||||||
| Voltage Rating (DC) | 48 V @ 0 to 60 Hz | 48 V @ 0 to 60 Hz | 48 V @ 0 to 60 Hz | |||||||
| Voltage Rating (AC) | 120 V @ 0 to 60 Hz | 120 V @ 0 to 60 Hz | ||||||||
| Frequency | 0 to 60 Hz | |||||||||
| Current | 1/2 A | 2 A | 5 A | 1/2 A | 2 A | |||||
| Insertion Loss Curve |
 Curve 1, Minimum Insertion Loss |
|||||||||
| High-Altitude Electromagnetic Pulse (HEMP) Residual | < 0.1 A | < 0.1 A | < 0.1 A | < 1 A | < 1 A | |||||
| Major Dimension A | 6.90 in | 6.90 in | 8.40 in | 6.40 in | 6.40 in | |||||
| Major Dimension B | 4.50 in | 4.50 in | 6.00 in | 4.00 in | 4.00 in | |||||
| Major Dimension C | 1.25 in | 1.50 in | 2.00 in | 1.25 in | 1.25 in | |||||
| Major Dimension D | 2.50 in | 2.50 in | 3.00 in | 2.50 in | 2.50 in | |||||
| Visual/Mechanical | Per MIL-PRF-15733, Paragraph 4.6.1 | |||||||||
| Capacitance | Per MIL-STD-202, Method 305 @ 1 kHz | |||||||||
| Insulation Resistance | Per MIL-PRF-15733, Paragraph 4.6.7 with HEMP Protection Module Removed | |||||||||
| Dielectric Withstanding Voltage | Per MIL-PRF-15733, Paragraph 4.6.5 with HEMP Protection Module Removed | |||||||||
| Standard Insertion Loss | Per MIL-STD-220, 20 dB @ 10 kHz, 80 dB @ 10 MHz to 10 GHz | |||||||||
| Terminal Strength | Per MIL-PRF-15733, Paragraph 4.6.11 | |||||||||
| Voltage Discharge | Discharge to less than 30 Volts within 2 seconds after removal of power | |||||||||
| Quick Connect Tab Terminals | 1/4 in | |||||||||
| Operating Temperature | -55 to +71 ºC | |||||||||
| Storage Temperature | -55 to +105 ºC | |||||||||
| Chassis & Terminal Finish | Electro Tin-Lead | |||||||||
| Chassis Material | Cold Rolled Steel (CRS) | |||||||||
| Chassis Material Thickness | 20 gauge | |||||||||
| Minimum Insertion Loss | 20 dB @ 10 kHz 40 dB @ 100 kHz 60 dB @ 1 MHz 80 dB @ 10 MHz to 10 GHz | |||||||||
| Compliance | MIL-STD-188-125-1 MIL-STD-188-125-2 | |||||||||
| Features |
|
|||||||||
| Note | For compliance to E2 (intermediate pulse) add an "A" to the end of the part number (A-10356A). | For compliance to E2 (intermediate pulse) add an "A" to the end of the part number (A-10356A). | For compliance to E2 (intermediate pulse) add an "A" to the end of the part number (A-10356A). |
For compliance to E2 (intermediate pulse) add an "A" to the end of the part number (A-10356A) For 120 VAC units only, compliance to E2 increases overall dimension "A" by 2.5 inches. |
For compliance to E2 (intermediate pulse) add an "A" to the end of the part number (A-10356A) For 120 VAC units only, compliance to E2 increases overall dimension "A" by 2.5 inches. |
|||||
|
|
||||||||||
