Item # A-10556, Cabinet with 100 Ampere (A) Current Filter Standard Performance On Captor Corporation

Voltage Rating: 277/480 VAC @ 60 Hz
Current Rating: 5 through 150 amperes
HEMP Compliance: Per MIL-STD-188-125-1 and MIL-STD-188-125-2 as Power Line (Intrasite) point of entry filter for short (E1) and intermediate (E2) pulses.
Insertion Loss: Standard performance (curve 1) per MIL-STD-220
Leakage Current: < 10% of rated current 10 through 150 amperes, < 1 amp for 5 amp filters
Insulation Resistance: Per MIL-PRF-15733, prior to discharge resistor installation.
Dielectric Withstanding Voltage: 2250 VDC line-to-chassis per MIL-STD-202, Method 301 prior to surge arrestor and discharge resistor installation
Voltage Drop: Less than 1% of rated voltage per paragraph 4.6.8 of MIL-PRF-15733
Voltage Discharge: Discharge to less than 30 Volts within 30 s after removal of power
Operating Temperature: -40 ºC to +65 ºC
Storage Temperature: -55 ºC to +105 ºC

Unit of Measure

Specifications | Dimensions | Enclosure | Features | Note

Brands	N/A Captor
Voltage Rating (AC)	N/A 277 V480 V
Frequency	N/A 60 Hz
Current	N/A 100 A
Insertion Loss Curve	N/A Curve 1, Standard Performance Minimum Insertion Loss
Number of Circuits	N/A 3
Estimated Weight	N/A 220 lb
High Altitude Electromagnetic Pulse (HEMP) Compliance	N/A Per MIL-STD-188-125-1 and MIL-STD-188-125-2 as Power Line (Intrasite) Point of Entry Filter for Short (E1) and Intermediate (E2) Pulses.
Minimum Insertion Loss	N/A 20 dB @ 10 kHz 40 dB @ 100 kHz 60 dB @ 1 MHz 80 dB @ 10 MHz to 10 GHz
Leakage Current	N/A < 10% of Rated Current 10 through 150 Amperes, < 1 Amp for 5 Amp Filters
Insulation Resistance	N/A Per MIL-PRF-15733, prior to discharge resistor installation.
Dielectric Withstanding Voltage	N/A 2250 VDC Line-to-Chassis Per MIL-STD-202, Method 301 Prior to Surge Arrestor and Discharge Resistor Installation
Voltage Drop	N/A Less than 1% of rated voltage per paragraph 4.6.8 of MIL-PRF-15733
Voltage Discharge	N/A Discharge to Less than 30 Volts within 30 s After Removal of Power
Operating Temperature	N/A -40 to +65 °C
Storage Temperature	N/A -55 to +105 °C
Compliance	N/A MIL-STD-188-125-1 MIL-STD-188-125-2

N/A

Modified NEMA 1 type enclosure
Cabinets: Stainless steel construction
Stand alone filters and inserts: Cold rolled steel construction with a corrosion resistant plating
Epoxy paint optional
Shielding effectiveness on clean side greater than 100 dB from 14 kHz to 10 GHz
Dual removable access covers.

N/A

N/A Specifications subject to change.

Brands