Captor Corporation - Power Line HEMP Filters High Performance

Voltage Rating: 277/480 VAC @ 60 Hz
Current Rating: 5 through 150 amperes
HEMP Compliance: Per MIL-STD-188-125-1 and MIL-STD-188-125-2 as Power Line (Intrasite) point of entry filter for short (E1) and intermediate (E2) pulses.
Insertion Loss: high performance (curve 2) per MIL-STD-220
Leakage Current: < 10% of rated current 10 through 150 amperes, <1 amp for 5 amp filters
Insulation Resistance: Per MIL-PRF-15733, prior to discharge resistor installation.
Dielectric Withstanding Voltage: 2250 VDC line-to-chassis per MIL-STD-202, Method 301 prior to surge arrestor and discharge resistor installation
Voltage Drop: Less than 1% of rated voltage per paragraph 4.6.8 of MIL-PRF-15733
Voltage Discharge: Discharge to less than 30 Volts within 30 s after removal of power
Operating Temperature: -40 ºC to +65 ºC
Storage Temperature: -55 ºC to +105 ºC

Dimensional Drawing for Power Line HEMP Filters High Performance

Unit of Measure

Items	A-10561 5 Ampere (A) Current Power Line Stand Alone HEMP Filter High Performance	A-10562 5 Ampere (A) Current Power Line Stand Alone HEMP Filter High Performance	A-10563 5 Ampere (A) Current Power Line Stand Alone HEMP Filter High Performance	A-10564 10 Ampere (A) Current Power Line Stand Alone HEMP Filter High Performance	A-10565 10 Ampere (A) Current Power Line Stand Alone HEMP Filter High Performance
Description	N/A Voltage Rating: 277/480 VAC @ 60 Hz Current Rating: 5 through 150 amperes HEMP Compliance: Per MIL-STD-188-125-1 and MIL-STD-188-125-2 as Power Line (Intrasite) point of entry filter for short (E1) and intermediate (E2) pulses. Insertion Loss: high performance (curve 2) per MIL-STD-220 Leakage Current: < 10% of rated current 10 through 150 amperes, <1 amp for 5 amp filters Insulation Resistance: Per MIL-PRF-15733, prior to discharge resistor installation. Dielectric Withstanding Voltage: 2250 VDC line-to-chassis per MIL-STD-202, Method 301 prior to surge arrestor and discharge resistor installation Voltage Drop: Less than 1% of rated voltage per paragraph 4.6.8 of MIL-PRF-15733 Voltage Discharge: Discharge to less than 30 Volts within 30 s after removal of power Operating Temperature: -40 ºC to +65 ºC Storage Temperature: -55 ºC to +105 ºC
Brands	N/A Captor
Voltage Rating (AC)	N/A 277 V480 V
Frequency	N/A 60 Hz
Current	N/A 5 A	N/A 5 A	N/A 5 A	N/A 10 A	N/A 10 A
Insertion Loss Curve	N/A Curve 2, High Performance Minimum Insertion Loss
Number of Circuits	N/A 2	N/A 3	N/A 4	N/A 2	N/A 3
Dimension A	N/A 9.00 in	N/A 13.5 in	N/A 18.00 in	N/A 9.00 in	N/A 13.5 in
Dimension B	N/A 36.0 in
Dimension C	N/A 5.5 in
Dimension D	N/A 35.0 in
Dimension E	N/A 8.0 in	N/A 12.5 in	N/A 17.0 in	N/A 8.0 in	N/A 12.5 in
Estimated Weight	N/A 75 lb	N/A 110 lb	N/A 145 lb	N/A 85 lb	N/A 125 lb
High Altitude Electromagnetic Pulse (HEMP) Compliance	N/A Per MIL-STD-188-125-1 and MIL-STD-188-125-2 as Power Line (Intrasite) Point of Entry Filter for Short (E1) and Intermediate (E2) Pulses.
Minimum Insertion Loss	N/A 100 dB @ 14 kHz to 10 GHz
Leakage Current	N/A < 10% of Rated Current 10 through 150 Amperes, < 1 Amp for 5 Amp Filters
Insulation Resistance	N/A Per MIL-PRF-15733, prior to discharge resistor installation.
Dielectric Withstanding Voltage	N/A 2250 VDC Line-to-Chassis Per MIL-STD-202, Method 301 Prior to Surge Arrestor and Discharge Resistor Installation
Voltage Drop	N/A Less than 1% of rated voltage per paragraph 4.6.8 of MIL-PRF-15733
Voltage Discharge	N/A Discharge to Less than 30 Volts within 30 s After Removal of Power
Operating Temperature	N/A -40 to +65 °C
Storage Temperature	N/A -55 to +105 °C
Compliance	N/A MIL-STD-188-125-1 MIL-STD-188-125-2
Enclosure	N/A Modified NEMA 1 type enclosure Cabinets: Stainless steel construction Stand alone filters and inserts: Cold rolled steel construction with a corrosion resistant plating Epoxy paint optional Shielding effectiveness on clean side greater than 100 dB from 14 kHz to 10 GHz Dual removable access covers.
Features	N/A Inductive input Individually Filtered Lines Surge arrestors V481BA60 included Custom options available
Note	N/A Specifications subject to change.