| Items |
 /ImgCustom/1001/placeholder_notavailable.gif A-10540 5 Ampere (A) Current Power Line Stand Alone HEMP Filter Standard Performance |
/ImgCustom/1001/placeholder_notavailable.gif A-10541 5 Ampere (A) Current Power Line Stand Alone HEMP Filter Standard Performance |
/ImgCustom/1001/placeholder_notavailable.gif A-10542 5 Ampere (A) Current Power Line Stand Alone HEMP Filter Standard Performance |
/ImgCustom/1001/placeholder_notavailable.gif A-10543 10 Ampere (A) Current Power Line Stand Alone HEMP Filter Standard Performance |
/ImgCustom/1001/placeholder_notavailable.gif A-10544 10 Ampere (A) Current Power Line Stand Alone HEMP Filter Standard Performance |
|||||
| Description |
|
|||||||||
| Brands | Captor | |||||||||
| Voltage Rating (AC) | 277 V480 V | |||||||||
| Frequency | 60 Hz | |||||||||
| Current | 5 A | 5 A | 5 A | 10 A | 10 A | |||||
| Insertion Loss Curve |
 Curve 1, Standard Performance Minimum Insertion Loss |
|||||||||
| Number of Circuits | 2 | 3 | 4 | 2 | 3 | |||||
| Dimension A | 9.00 in | 13.5 in | 18.00 in | 9.00 in | 13.5 in | |||||
| Dimension B | 30.0 in | |||||||||
| Dimension C | 5.5 in | |||||||||
| Dimension D | 29.0 in | |||||||||
| Dimension E | 8.0 in | 12.5 in | 17.0 in | 8.0 in | 12.5 in | |||||
| Estimated Weight | 50 lb | 75 lb | 105 lb | 60 lb | 90 lb | |||||
| High Altitude Electromagnetic Pulse (HEMP) Compliance | Per MIL-STD-188-125-1 and MIL-STD-188-125-2 as Power Line (Intrasite) Point of Entry Filter for Short (E1) and Intermediate (E2) Pulses. | |||||||||
| Minimum Insertion Loss | 20 dB @ 10 kHz 40 dB @ 100 kHz 60 dB @ 1 MHz 80 dB @ 10 MHz to 10 GHz | |||||||||
| Leakage Current | < 10% of Rated Current 10 through 150 Amperes, < 1 Amp for 5 Amp Filters | |||||||||
| Insulation Resistance | Per MIL-PRF-15733, prior to discharge resistor installation. | |||||||||
| Dielectric Withstanding Voltage | 2250 VDC Line-to-Chassis Per MIL-STD-202, Method 301 Prior to Surge Arrestor and Discharge Resistor Installation | |||||||||
| Voltage Drop | Less than 1% of rated voltage per paragraph 4.6.8 of MIL-PRF-15733 | |||||||||
| Voltage Discharge | Discharge to Less than 30 Volts within 30 s After Removal of Power | |||||||||
| Operating Temperature | -40 to +65 °C | |||||||||
| Storage Temperature | -55 to +105 °C | |||||||||
| Compliance | MIL-STD-188-125-1 MIL-STD-188-125-2 | |||||||||
| Enclosure |
|
|||||||||
| Features |
|
|||||||||
| Note | Specifications subject to change. | |||||||||
|
|
||||||||||
